-
Dielectric Immersion Coolant: Cooling Live Hardware Without Short Risk
Dielectric Immersion Coolant: Cooling Live Hardware Without Short Risk Immersion cooling wraps live boards in fluid. A dielectric immersion coolant must be non-conductive by nature so the hardware still runs. Here is why. Glacier Coolant hears the same worry every time immersion coolin...Read more -
Coolant Lifecycle Model: A Checklist Before You Refill
Coolant Lifecycle Model: A Checklist Before You Refill Before you refill a carrier, score it on a lifecycle model: makeup, cleaning, waste, equipment wear and downtime. A free checklist inside. Glacier Coolant is asked every week which carrier is cheapest. Glacier Coolant answers with ...Read more -
Secondary Refrigerant TCO: Why Cheap Fill Can Cost More Over Four Years
SECONDARY REFRIGERANT Secondary Refrigerant TCO: Why Cheap Fill Can Cost More Over Four Years A cheap first fill of a secondary refrigerant often hides years of makeup, cleaning and waste cost. Build a TCO model before you buy. Glacier Coolant works with plant engineers who compare car...Read more -
Heat-Transfer Oil Degradation: The Four Stages You Can Read
Heat-Transfer Oil Degradation: The Four Stages You Can Read Heat-transfer oil is the quiet fluid in a plant. It moves hundreds of degrees through a system and asks for little. Then one day the filter clogs and the tube wall runs hot. Glacier Coolant reads degradation as a sequence, not a single...Read more -
LM-450-PL: The Primary-Loop Coolant Built for Data Centres
LM-450-PL:The Primary-Loop Coolant Built for Data Centres The primary loop carries total heat over long, high-pressure pipe. LM-450-PL is a modified ethylene glycol built for that duty. The primary loop is the part of a liquid-cooling system most people never see. It is also the part t...Read more -
Choosing an EHS-Friendly Secondary Refrigerant for Chemical Plants
Choosing an EHS-Friendly Secondary Refrigerant for Chemical Plants A chemical plant’s carrier fluid is public-engineering risk. Score toxicity, breakdown products and corrosion waste before you specify. Most plants pick a carrier fluid on freeze point and price. That is the easy column. ...Read more -
Evaluating a Coolant Supplier: Ten Checks Before You Sign
Evaluating a Coolant Supplier: Ten Checks Before You Sign Coolant is the rare purchase where the buyer signs a ten-year chemistry contract disguised as a one-line order. The drum arrives next week. The consequences of the choice arrive for a decade. The drum arrives next week; the consequences o...Read more -
Four Acceptance Tests for Energy-Storage Coolant
Four Acceptance Tests for Energy-Storage Coolant An operations manual for battery storage cooling loops: multi-metal compatibility, fifteen-year chemistry, seal compatibility and online monitoring — each with an acceptance test. An energy-storage cooling loop is quiet for years, then unforgivin...Read more -
Writing a Ten-Year Coolant Specification for a Cold-Plate Loop
Writing a Ten-Year Coolant Specification for a Cold-Plate Loop A blueprint for specifying inhibited ethylene glycol coolant for a decade of cold-plate service: thermal and oxidative stability, corrosion inhibition, physical behaviour and hygiene. A cold-plate hall is designed to run for a d...Read more -
Low Conductivity Is an Outcome, Not a Strategy: The Glycol Liquid Cooling Trade-Off
Low Conductivity Is an Outcome, Not a Strategy: The Glycol Liquid Cooling Trade-Off Chasing the lowest conductivity reading in glycol liquid cooling can strip the inhibitor film that protects your loop. Where the real trade-off sits, and how to specify it Lab notebooks rarely make it into m...Read more -
Total Iron Is the Honest Number in a Glycol Brine Loop
Total Iron Is the Honest Number in a Glycol Brine Loop For carbon-steel chilled loops, total iron in the fluid tells you whether your corrosion program works. A field log of what the number looks like before, during and after a fix. Field logs beat theory. When a carbon-steel brine loop misbe...Read more -
Immersion Cooling Across Server, Edge and High-Density Racks: Picking the Right Secondary Refrigerant
Immersion Cooling Across Server, Edge and High-Density Racks: Picking the Right Fluid Band Immersion is not one fluid. High-density compute, wide-temperature edge duty and cost-sensitive storage each ask for a different immersion grade. How to match the band to the box. “Immersion coo...Read more
